26th European Symposium on Computer Aided Process Engineering: Part A and B

Portada
Elsevier, 17 jun. 2016 - 2486 páginas
0 Reseñas

26th European Symposium on Computer Aided Process Engineering contains the papers presented at the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event held at Portorož Slovenia, from June 12th to June 15th, 2016.

Themes discussed at the conference include Process-product Synthesis, Design and Integration, Modelling, Numerical analysis, Simulation and Optimization, Process Operations and Control and Education in CAPE/PSE.

  • Presents findings and discussions from the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event
 

Comentarios de usuarios - Escribir una reseña

No hemos encontrado ninguna reseña en los lugares habituales.

Índice

Efficient simulation of heterogeneity and stochasticity in microbial processes
1213
Ionic Liquids Role in Multifeedstock Multiproduct Integrated Biorefineries
1219
Quantifying the importance of flow maldistribution in numberedup microreactors
1225
Modeling Simulation and Economic Evaluation of a Hybrid CO2 Capture Process for Oxidative Coupling of Methane
1231
An Enhanced GroupInteraction Contribution Method for the Prediction of Normal Boiling and Critical points
1237
Framework for optimization and scheduling of a copper production plant
1243
Systematic efficient and consistent LCA calculations for chemical and biochemical processes
1249
Modelling and optimization of compact subsea liquidliquid separation system
1255

Technoeconomic analysis of the production of epichlorhydrin from glycerol
49
Kriging based Fault Detection and Diagnosis Approach for Nonlinear Noisy Dynamic Processes
55
Kinetics of Phycocyanobilin Cleavage from CPhycocyanin by Methanolysis
61
Simulation of Turbulent Particulate Flows for Nuclear Waste Management Agglomeration in Vertical Flows
67
A feasibilitybased algorithm for Computer Aided Molecular and Process Design of solventbased separation systems
73
Multiobjective Retrofitting Methodology for Manufacturing Processes of Active Pharmaceutical Ingredients Considering Environment Health and Sa...
79
Performance Evaluation of Unsteady Processes with Dynamic and Temporal Flexibility Indices
85
Solution of ChanceConstrained MixedInteger Nonlinear Programming Problems
91
Hydrogen Sulphide Scavenging Simulation in HYSYS
97
Dynamic RealTime Optimization of Microgrids with DayAhead Commitments for External Power Exchange
103
Methodology for preselecting heatintegrated mass allocation networks likely to be associated withcost efficient HEN
109
ComputerAided Molecular Design by Combining Genetic Algorithms and COSMORS
115
Energy consumption maps for quaternary distillation sequences
121
Energy integration of a hydrotreating process for the production of biojet fuel
127
Mathematical Optimization of the Production of Fuel Pellets from Residual Biomass
133
On Optimal Assignment of Cold Stand by Components for MultiChannel Safety Interlocks
139
Optimising biomassbased energy supply chains for sustainable mobility
145
Estimation of membrane fouling parameters for concentrating lactose using nanofiltration
151
MultiScale Modeling of Solid Electrolyte Interface Formation in LithiumIon Batteries
157
Automatic Model Reduction of Population Balance Models by Proper Orthogonal Decomposition
163
Parallel computing in multiparametric programming
169
Modelling of a Reactive Distillation in the production process of high purity Cyclohexanone to produce caprolactam
175
Multimodal Green Food Supply Chain Design and Planning under Uncertainty
181
DerivativeFree Chemical Process Synthesis by Memetic Algorithms Coupled to Aspen Plus Process Models
187
Price Adjustment in Pricebased Coordination Using Quadratic Approximation
193
Is Wood Waste Only for Burning? A Methodology for Best Pathway Identification of Waste Recovery
199
A new scheme for process simulation by optimization distillation as an example
205
Renewable electricity integration at a regional level Cantabria case study
211
MultiStage Adaptive Robust Optimization over Bioconversion Product and Process Networks with Uncertain Feedstock Price and Biofuel Demand
217
Costbased analysis about a newly designed twostaged reverse osmosis process with draw solute
223
Chemical Looping Reforming Impact on the Performances Due to Carbon Fouling on Catalyst
229
Targeting the hydrogen network and optimal feed using rigorous simulation
235
Incorporating life cycle assessment indicators into optimal electric vehicle charging strategies An integrated modelling approach
241
Neural Networks Modeling of Dearomatization of Distillate Cuts with Furfural to Produce Lubricants
247
Lignocellulosic supply chain MILP model a Hungarian case study
253
A framework for modelling investment decisions in gas infrastructures
259
Process Design and Integration of Various Carbon Capture Approaches into the Energy Sector and Other Energyintensive Industrial Applications
265
Assessment of chemical looping combustion process by dynamic simulation
271
Comparison of Different Heat Exchanger Tube Designs used in Latent Heat Thermal Energy Storage Systems a Numerical Study
277
Global sensitivity analysis of computeraided molecular design problem for the development of novel working fluids for power cyc
283
Minimizing the complexity of surrogate models for optimization
289
Optimization Methods for Catalyst Design
295
Modelbased framework for enhanced and controlled operation of a fedbatch bioreactor xylitol production
301
Dynamic behavior of a multitasking reactive distillation column for production of silane dichlorosilane and monochlorosilane
307
Use of predictor corrector methods for multiobjective optimization of dynamic systems
313
Economic riskbased analysis Effect of technical and market price uncertainties on the production of glycerolbased isobutanol
319
Synthesis and Optimization of Microalgae Biorefineries
325
Testing the NonDiagonal Quadratic Convex Reformulation Technique
331
Development of soft sensor with neural network and nonlinear variable selection for crude distillation unit process
337
Modelling of organophilic pervaporation to compete with distillation
343
Optimal regional resource utilisation the St Margarethen case
349
Mathematical Programming Approach for the Design of Intensified Thermally Coupled Distillation Sequences
355
DiscreteTime MIP Methods for Production Scheduling in Multistage Facilities
361
Economic Environmental and Dynamic Optimization Applied to Hybrid Processes for the Purification of Biobutanol
367
Purification of Bioethanol from a Fermentation Process Alternatives for Dehydration
373
Optimization of OSN Membrane Cascades for Separating Organic Mixtures
379
On a systems approach to support novelty in bioreactor design
385
Comparison of ContinuousTime Models for Adjustable Robust Optimization in Process Scheduling under Uncertainty
391
Developing a Soft Sensor with Online Variable Selection for Industrial Multimode Processes
397
CFD Modelling of Bubbly Gas Flow using Coupled OPOSPMTwoFluid Model
403
Design and control of azeotropic dividing wall column for separating furfuralwater mixture
409
Multiobjective Optimization of Membrane Networks for Fractionation of Protein Hydrolysate from Fish ByProducts
415
Optimization and Monte Carlo Simulation for Product Launch Planning under Uncertainty
421
Population Balance Modelling of Liquid Extraction Columns using the Sectional Quadrature Method of Moments SQMOM
427
Robust multiobjective optimal control of dynamic biological networks
433
Influence of the Mushy Zone Constant on the Numerical Simulation of the Melting and Solidification Process of Phase Change Materials
439
CFD Simulation of Boiling Flows for Nuclear Reactor Thermal Hydraulic Applications
445
Group Interaction Contribution Approach for Prediction of Electrochemical Properties of Ionic Liquids
451
WholeSystems Modelling of Alternatives for Future Domestic Transport
457
Multiscale modelling software framework facilitating simulation of interconnected scales using surrogatemodels
463
Reliable Energy Systems Design for Continuous Processes incorporating Renewables Generation
469
Dynamic impact milling model with a particlescale breakage kernel
475
Projectionbased Reformulation and Decomposition Algorithm for A Class of MixedInteger Bilevel Linear Programs
481
Mass and energy integration for the supercritical process for biodiesel production and a bioethanol dehydration train
487
Convex Model for Global Optimization of Water Distribution System
493
Multilevel Modelling of Sustainable Chemical Production from CFD to LCA
499
Modeling and simulation of phase change and nonideality in multistream heat exchangers
505
Using Transient Measurements in Iterative SteadyState Optimizing Control
511
Computationally Efficient SteadyState Process Simulation by Applying a Simultaneous Dynamic Method
517
Spatial branch and bound algorithm for the global optimization of MIQCPs
523
Risk Management of Shale Gas Supply Chain under Estimated Ultimate Recovery Uncertainty
529
Optimal Design and Synthesis of Shale Gas Processing and NGL Recovery Processes
535
A LeaderFollower GameBased Life Cycle Optimization Framework and Application
541
Adjustable Robust Optimization for Scheduling of Batch Processes under Uncertainty
547
Effective Sampling Modeling and Optimization of Constrained Blackbox Problems
553
Integration of Energycost Optimization and Production Scheduling Using Multiparametric Programming
559
Simulation and optimization of the molecular weight distribution in a nonideal polymerization reactor
565
Efficient optimizationbased design of energetically intensified distillation processes
571
Anaerobic Bioreactor Modeling
577
Effects of Bioethanol Pretreatments on the Broth Concentration and its Impacts in the Optimal Design of Product Separation and P
583
Biosyngas Conversion by FT Synthesis with High Loaded Febased Catalysts Kinetic Parameters Regression
589
Design of a Multiproduct Lignocellulosic Biorefinery through the Process Modelling of a Feasible Superstructure
595
A Framework for Integrated Scheduling and Control using DiscreteTime Dynamic Process Models
601
A modelbased investigation of genetically modified microalgae strains
607
Inclusion of thermodynamic equations for efficient steadystate process optimization
613
Application of a Knowledge Management System to a Dropwise Additive Manufacturing System for Pharmaceuticals
619
Multiscale Simulation of Bubbly Flows
625
Smart Adaptive Sampling for Surrogate Modelling
631
Novel plantwide process design of dichlorohydrin production by glycerol hydrochlorination
637
Optimization of dynamic systems with rigorous path constraint satisfaction
643
Green Approaches to Extract Astaxanthin from Shrimp Waste Process Design and Economic Evaluation
649
Synthesis and Design Strategies of Interplant Water Networks using Water Mains with Quality Specifications
655
Inventory Management during Startup Operations of the Benchmark Chemical Plant
661
Conceptual reactive crystallization process design for separation and purification of phosphorus from complex sludge ash
667
Modelling and Optimal Control of NonViral siRNA Delivery
673
Process retrofit for energyuse improvement of an absorption and stabilization process in refineries
679
A Generic Methodology for Superstructure Optimization of Different Processing Networks
685
A Reformulation Strategy for Deterministic Global Optimization of Ideal Multicomponent Distillation Processes
691
Synthesis of Intensified Processes from a Superstructure of Phenomena Building Blocks
697
A hierarchical coordination approach to the optimal operation of a sugar crystallization process
703
Forest Supply Chain Optimization applying Generalized Disjunctive Programming
709
Integrated Transhipment Models for Synchronous Screening of Treatment Technologies and Targeting of Fresh Water and Recycle Flows
715
Levelised Value of Electricity A Systemic Approach to Technology Valuation
721
Intensified Separation Processes for the Recovery and Dehydration of Bioethanol from an Actual Lignocellulosic Fermentation Broth
727
A Holistic Approach to Model Discovery Using A Domain Ontology
733
Design of a chemical batch plant a study of dedicated parallel lines with intermediate storage and the plant performance
739
MultiProduct Reactive Distillation for Silanes Production
745
Optimization of Energy Consumption in a Hydrotreating Process for Green Diesel Production from Palm Oil
751
Optimal dynamic experiment design for guaranteed parameter estimation
757
Shortterm crude mix and operating conditions optimization for oil refinery operations
763
Robust Fault Isolation using Stable Principal Component Pursuit
769
An integrated process of cokeoven gas trireforming and coal to methanol with high carbon utilization and energy efficiency
775
A General Representation for the Modeling of Energy Supply Chains
781
TaylorMade Modeling and Solution of Novel Process Units by Modular CAPEOPENbased Flowsheeting
787
Timeseries aggregation for synthesis of distributed energy supply systems by bounding error in operational expenditure
793
Automated Data Review in Secondary Pharmaceutical Manufacturing by Pattern Recognition Techniques
799
Optimization of a Hydrogen Supply Chain Network Design by MultiObjective Genetic Algorithms
805
A Generic PAT Software Interface for OnLine Monitoring and Control of Chromatographic Separation Systems
811
Enhanced data envelopment analysis for sustainability assessment
817
Longterm planning and retrofitting of supply and distribution chains with decaying performance
823
Predictive Modelling of PhaseTransfer Catalyst Systems for Improved and Innovative Design
829
Analysis of the Carbon Efficiency of a Hybrid XTLCSP process
835
Sustainable Chemical Process Development through an Integrated Framework
841
Optimization of Economic and Operability Performances of Watergas Shift Membrane Reactor
847
Hybrid plantwide Simulation and Modelling using Reference nets and Java
853
Extracting knowledge from historical databases for process monitoring using feature extraction and data clustering
859
Investigating the energywatercarbon nexus of megascale chemicals production from Appalachian shale gas
865
A Multivariable Model Predictive Control Project in a Computer Aided Masters Degree Course
871
H2TT A pinch analysis software tool for refinery hydrogen network management
877
Modelling and optimization framework for the multiobjective design of buildings
883
Modelling and Simulation of an Industrial Riser in Fluid Catalytic Cracking Process
889
Optimal design and operation of semibatch reactive distillation for methyl lactate synthesis with fixed product demand
895
Development of Shale Gas Supply Chain Network under Market Uncertainties
901
Development of Hybrid FuzzyGMC Control System for MSF Desalination Process
907
Supply Chain Optimisation of Nipabased bioethanol industry in Thailand
913
Economic Evaluation of Hybrid FOcrystallizationRO Desalination Process
919
Modelling and Analysis of a Soybean Biorefinery for the Production of Refined Oil Biodiesel and Different Types of Flours
925
Disjunctive Models for Strategic Midstream Delivery Agreements in Shale Gas Development
931
Multiparametric Metamodels for Model Predictive Control of Chemical Processes
937
Optimal Reuse of Flowback Wastewater in Shale Gas Fracking Operations Considering Economic and Safety Aspects
943
Control relevant modelling for haemodialysis
949
Dynamic MultiScenario Approach to Robust and Profitable Online Optimization Optimal Control of Batch Processes
955
Merging information from batch and continuous flow experiments for the identification of kinetic models of benzyl alcohol oxidat
961
Multiperiod Sequential Synthesis of Heat Exchanger Networks and Utility Systems including storages
967
Simplification of EquationOriented Models through the Digraph Method
973
Enhanced DownStream Processing of Biobutanol in the ABE Fermentation Process
979
Enhanced Process for Methanol Production by CO2 Hydrogenation
985
Novel Process for Conversion of CO2 to Dimethyl Carbonate using Catalytic Membrane Reactors
991
Conceptual Design for the Separation of a Mixture of Isoamyl Acetate and Isoamyl Alcohol
997
A New Methodology to Reduce the Exergy Loss of Distillation Columns Using Rigorous Process Simulation
1003
Global Optimization for a Continuous LocationAllocation Model for Centralized and Distributed Manufacturing
1009
Towards a sustainable hydrogen economy role of carbon price for achieving GHG emission targets
1015
An Optimal Scheduling of the Heliostat Field in a Solar Tower Power Plant
1021
Systematic Solvent Evaluation for Artemisinin Recovery in Continuous Pharmaceutical Manufacturing
1027
Multiobjective Optimisation of Flavour and Processing Time in Beer Fermentation via Dynamic Simulation
1033
Firstprinciples Rheological Modelling and Parameter Estimation for Nanoparticlebased Smart Drilling Fluids
1039
Multiparametric Statistical Analysis of Economic Data for Continuous Pharmaceutical Manufacturing
1045
Bayesian Optimization with Dimension Scheduling Application to Biological Systems
1051
A framework for Simultaneous State Estimation and Robust Hybrid Model Predictive Control in Intravenous Anaesthesia
1057
Synthesis of Heat Exchangers Network HEN and Optimization under Variability and Uncertainty
1063
Coupled ThermoMechanicalChemical modelling of underground coal gasification
1069
An integrated unit commitment model incorporating electric vehicles as a flexible and responsive load
1075
Sustainable DME synthesisdesign with CO2 utilization
1081
Ontology construction for multinetwork models
1087
Phenomena Based Process Intensification of Toluene Methylation for Sustainable Paraxylene Production
1093
Optimal Planning of Distributed Systems of Refineries and Biorefineries Considering Pollution Trading with Forest Plantations
1099
Incremental Learning Fault Detection Algorithm Based on HyperplaneDistance
1105
Optimal Features Selection for Designing a Fault Diagnosis System
1111
Reverse Design of Ionic Liquids for the Absorption of CO2
1117
Conceptual Design of an Oil Shale Retorting Process Integrated with Chemical Looping for Hydrogen production
1123
First Steps towards Online Optimal Control of Molecular Weight in Batch and Semibatch FreeRadical Polymerization Reactors
1129
Dynamic Simulation and Optimisation of an Industrial Process for Tributyl Citrate Production
1135
Midterm Scheduling Model Based on StateTaskNetwork for Considering Plant Specific Constraints in Pharmaceutical Manufacturing
1141
Optimal Operating Condition of Fluidized Bed Propellant Incinerator Considering Fluidization Effect and Reaction of the Particles
1147
A Comprehensive Kinetic Investigation of the Ring Opening of LLLactide in the Presence of Multifunctional Polyalcohols
1153
Modelling and optimization of an activated sludge waste water treatment process
1159
Setvalued integration of uncertain dynamic systems with sensitivity analysis capability
1165
Using PLS and NIR spectra to model the first breakage step of a grain milling process
1171
Optimal design of water exchanges in ecoindustrial parks through a game theory approach
1177
Offline optimisation and control of carbon capture operations
1183
A new paradigm in process synthesis focus on design of power plants and industrial processes integrated with CO2 capture
1189
Enabling Sulfurrich Coal Sources for Gasification without Emissions
1195
Automated process flowsheet synthesis formembrane processes using genetic algorithm role of crossover operators
1201
Natural gas liquids NGL recovery in the liquefied natural gas production
1207
26th European Symposium on Computer Aided Process Engineering Part B
iii
Copyright
iv
Contents
v
Optimization of an acrolein production process in a pilotscale fixedbed reactor
1261
Implementation of hybrid DEMPBM approach to reduce the computational cost of powder mixing modeling
1267
Influence of mill characteristics on stability of continuous layering granulation with external product classification
1275
Model Based Engineering of Process Plants using SysML
1281
Modelling and simulation of a Uloop Reactor for Single Cell Protein Production
1287
Global Optimization of Gasoline Blending Model using Bound Contraction Technique
1293
Fuzzy Control of a Distillation Column
1299
A Novel Approach to Include Limited Equipment Connectivity in StateTask Network Models
1305
Mechanistic Models for Process Development and Optimization of Fedbatch Fermentation Systems
1311
Optimization of Lignocellulosic Waste Biorefinery using MultiActor MultiObjective Mathematical Framework
1317
Design and economic analysis of 12propanediol derived from Crude glycerol
1323
Control of an Extractive Distillation Column with Thermal Integration
1329
Onestage approach for the integrated design of ORC processes and working fluid using PCSAFT
1335
Optimization of Aeration Power in a SBR
1341
Process and Economic Optimisation of a Milk Processing Plant with Solar Thermal Energy
1347
An intelligent decision making and notification system based on a knowledgeenabled supervisory monitoring platform
1353
Integrated design and operation assessment of an embedded supervisory automation framework for a hybrid hydrogenenabled power g
1359
Design and Comparison of Optimal Reactor Concepts for the Hydroformylation of Olefins by Use of a Probabilistic Design Framework
1365
Wastewater Quality Impact on Water Management in Shale Gas Supply Chain
1371
Imputation of Missing Data with Ordinary Kriging for Enhancing Fault Detection and Diagnosis
1377
Economically optimal multiactor processing networks material flows and price assignment of the intermediates using Lagrangian
1383
Population Balance Applied to Microalgae Growth
1389
Ammonia supply chains A new framework for renewable generation with a case study for Minnesota
1395
Analysis of Operational Heat Exchanger Network Robustness via Interval Arithmetic
1401
Effect of Solvent Feeding Time on the Startup Operation of an Extractive Distillation Column
1407
Geometry optimization of a fibrous scaffold based on mathematical modelling and CFD simulation of a dynamic cell culture
1413
Synthesis of preliminary system designs for offshore oil and gas production
1419
Sugar extraction by movingbed diffusers inethanol production development of a simulation tool
1425
Optimal Design of an Integrated Radiant Syngas Cooler and Steam Methane Reformer using NLP and Metaheuristic Algorithms
1431
Conceptual process design for Boric Acid A casestudy for engineering education
1437
Global Sensitivity Analysis of Reverse Osmosis Processes
1443
Synthesis of Heat Exchanger Networks and Utility Systems sequential initialization procedure and simultaneous MINLP algorithm
1449
Mathematical Modellingbased Energy System Operation Strategy considering Energy Storage Systems
1455
Mineral Concentration Plants Design Using Rigorous Models
1461
MOMCS An Efficient Multiobjective Optimization Algorithm for the Optimization of TemperaturePressure Swing Adsorption Cycles
1467
A Systematic Framework for the Design and Implementation of Sensing and Control Architecture for a Continuous Pharmaceutical Manufacturing Pl...
1473
Equationbased Rigorous Modelling of the NOx Absorption Process Model Development and Process Optimization
1479
Movinghorizon State Estimation with Gross Error Detection for a Hydroformylation Miniplant
1485
Residential Microgrid Design Optimisation under Uncertain µ CHP Characteristics
1491
MultiObjective Optimisation in a Petrochemical Complex with LCA considerations
1497
NLP optimization for the design of sustainable wastewater treatment networks
1503
Design of sustainable municipal wastewater treatment plants
1509
Multiobjective optimization for the biotechnological conversion of lingocellulosic biomass to valueadded products
1515
ClosedLoop Identification of Nonlinear Hammerstein Model Based on Subspace Approach
1521
Development of a Neural Networkbased Renewable Energy Forecasting Framework for Process Industries
1527
Development of a model for identifying the optimal biogas system design in SubSaharan Africa
1533
Dynamic Optimization of Desalination System Designs using Aspen Custom Modeler
1539
Selection of an Energetically More Feasible Route for Hydrocarbon Extraction from Microalgae Milking of B braunii as a Case Study
1545
Structure optimization of powertochemicals P2C networks by linear programming for the economic utilization of renewable surplus energy
1551
Comparison between Experimental and Simulated Data of a Distillation Column Evaluation of Mass Heat Balances and Trays Efficiency
1557
Using Dynamic Simulation for Risk Assessment Application to an Exothermic Reaction
1563
Robust Optimization for Petroleum Supply Chain Collaborative Design and Planning
1569
Managing Uncertainty Information for Improved DataDriven Modelling
1575
A Predictive Model for Energy Metabolism and ATP Balance in Mammalian Cells Towards the EnergyBased Optimization of mAb Production
1581
Prediction of the Solubility in Supercritical Carbon Dioxide a Hybrid ThermodynamicQSPR Approach
1587
Distributed minimum batch time optimization for batch reactors with shared resources
1593
Optimal StartUp and Operation Policy for an Ultrafiltration Membrane Unit in Whey Separation
1599
Convergence Order of McCormick Relaxations of LMTD function in Heat Exchanger Networks
1605
A new approach for pharmacokinetic model application towards personalized medicine
1611
Structural and economic analysis of Industrial Symbiosis networks a hybrid approach to assess investment opportunities
1617
Modelling ReactionDiffusion Dynamics in Microsystems
1623
An extended comparison study of large scale datadriven prediction methods based on variable selection latent variables penalized regression and mac...
1629
Evaluation of the production of lipids for fuels and proteins from microalgae by decomposition of the processing network
1635
Integrating Uncertainty into Urban Energy System Design
1641
Energy Supply Chain optimisation for capacity and investment planning
1647
Optimal design of a styrene monomer plant under market volatility
1653
Development of advanced computational tools for the intensification of monoclonal antibody production
1659
Computational tools for the advanced control of periodic processes Application to a chromatographic separation
1665
Simulation Optimization and Control of Heavy Oil Upgrading Processes Application to a Delayed Coking Unit
1671
Optimization of Batch Extractive Distillation with Offcut Recycle and Varying Feed Composition
1677
Solvent Design for Post Combustion Chemical Absorption Process
1683
Material Flow Analysis MFA and Life Cycle Assessment LCA Study for Sustainable Management of PVC Wastes in Thailand
1689
Material Flow Analysis and Life Cycle Assessment Study for Sustainable Management of Wastes of Metropolitan Electricity Authority MEA
1695
Heat Exchanger Network Design with Fouling Effects
1701
SimulationOptimization of carbon dioxide capture plant A case study of AGRU from Thailand
1707
Biodiesel from Sunflower Oil Development of Process Model via Lab scale Experiment and Optimisation
1713
Study of thermal efficiency in heavy oil reservoirs submitted to steam injection by using numerical simulation
1719
Application of a Multiple TimeScale Rolling Horizon Optimization Technique for Improved LoadFollowing of an Integrated SOFCCAES Plant with ...
1725
A Microalgaebased Biorefinery Plant for the Production of Valuable Biochemicals Design and Economics
1731
Modeling and Simulation of Diffusion Process in Tissue Spheroids Encaged into Microscaffolds Lockyballs
1737
Analysis of the intermittency of the steam alternating solvent process SAS applied to a heavy oil reservoir
1743
Optimisation of Maintenance Planning into the Production of Biopharmaceuticals with Performance Decay using a Continuoustime Formulation
1749
A Systematic Approach for the Hydrotreating of Biodiesel and PetroleumDiesel Blends
1755
Optimal Power Sharing Control in Networked Fuel Cell Stacks
1761
Appropriate placement of compressors and expanders in subambient processes
1767
Bayesian treed Gaussian process method for process monitoring
1773
Computational Experiments on Sampling Methods for Uncertainty Propagation and the Implications for SimulationBased Optimization
1779
TechnoEconomic Evaluation of an Oxidative Coupling of Methane Process at Industrial Scale Production
1785
Minimum Reflux of Complex Distillation Columns Adiabatic Flash Method on EnthalpyComposition Diagram
1791
Design and Evaluation of a HighDensity Energy Storage Route with CO2 ReUse Water Electrolysis and Methanol Synthesis
1797
Impact of protein coproduction on technoeconomic feasibility of microalgal biodiesel
1803
Heat Exchanger Network Synthesis using a Genetic AlgorithmsParticle Swarm Optimization Hybrid Method and Parallel Processing
1809
FI2EPI A freeware tool for performing Heat Integration based on Pinch Analysis
1815
A Supercritical Reactive Separation Process to Obtain Biopesticides phorbolesters in the Biodiesel Production from Jatropha curcas Oil
1821
Simultaneous Optimization and Integration of Gas Turbine and Air Separation Unit Using Novel Simplified Model
1827
Optimization of Preventive Maintenance Program for Imaging Equipment in Hospitals
1833
A Mixed Integer Programming Model for Sustainable Water Management in Macroscopic Systems
1839
Process and Heat Integrated Design of a Novel NGL Recovery Scheme
1845
Computational Workflow Management in the context of ModelBased Design of Experiments
1851
On the reduction of the overestimation in verified simulation by model reformulation
1857
Improving the wastewater treatment plant performance through model predictive control strategies
1863
Heat exchanger network design with multistream exchangers using stagewise superstructure
1869
Synthesis of Mass Exchange Networks Using Mathematical Programming and Detailed Cost functions
1875
Bifurcation analysis of process stability of continuous fluidized bed agglomeration with external product classification
1881
Improving proton exchange membrane efficiency of fuel cell by numerical simulation and optimization
1887
Screening methodology for biorefineryand power to chemicals concepts
1893
Strategic Energy Planning under Uncertainty a Mixed Integer Linear Programming Modeling Framework for LargeScale Energy Systems
1899
Conditionbased chemical cleaning of crude oil deposits a conceptual model
1905
Modelbased monitoring of thermalhydraulic performance of refinery heat exchangers undergoing fouling
1911
Distillation Energy Assessment for Solvent Recovery from Carbon Dioxide Absorption
1917
Enhanced Distillation Based on Feed Impurities
1923
Hybrid MILPSimulationHeuristic Algorithms to Complex Hoist Scheduling Problems
1929
Online Approach for Diagnosis and Rectification of ModelPlant Mismatch in Open Reaction Systems using Incremental Framework
1935
PiXAR Pinch and eXergy for the Analysis and Retrofit design of industrial processes
1941
Integrated modeling of agricultural and industrial processes within life cycle design for environment
1947
Application of a simultaneous approach for process scheduling and water minimisation in batch plants
1953
A computeraided scenario analysis of national and regional energy systems based on feasible technology options
1959
Calculation of the Optimal Distribution of the Active Metal Site Concentration in a ZieglerNatta Catalyst to Maximize Polymer Yield in Olefin Polym...
1965
SolACE An Open Source Package for Nolinear Model Predictive Control and State Estimation for BioChemical Processes
1971
Global optimization of nonconvex bilevel problems implementation and computational study of the BranchandSandwich algorithm
1977
A Novel Experimental Strategy for Validating Human Failure Probabilities in Risk Assessment
1983
Life cycle modelling of a handicraft sector the anchovy canning industry in Cantabria Northern Spain
1989
A New Technology to Optimize the Use of H2S Scavengers in the Crude Oil Production
1995
Integrated Biorefinery Scheme Design for the Coproduction of Premium Quality Liquid Fuels and Propylene
2001
Modelling of a Postcombustion CO2 Capture Process Using Bootstrap Aggregated Extreme Learning Machines
2007
Development of semanticallyenabled community hubs in biorefineries and biorenewables
2013
Framework for assessing social sustainability in supply chains
2019
A Comparative Study of FischerTropsch Synthesis for Liquid Transportation Fuels Production from Biomass
2025
Practical Implementation of a RTO in an IndustrialScale Vapor Recompression Distillation Process
2031
Integrated multilevel bioenergy supply chain modelling applied to sugarcane biorefineries in South Africa
2037
Cognitive Engineering for Process Safety Effective Training for Process Operators Using Eye Gaze Patterns
2043
Relating Reaction Rate Constant to Structures of Reactants and Solvent Using a Hybrid GADT Approach
2049
MultiObjective ComputerAided Molecular Design of Reactants and Products
2055
Nonintrusive Appliance Load Monitoring for Electrical Energy Systems Simulation and Analysis A case study in India
2061
MultiPeriod Heat Exchanger Network Synthesis Involving Multiple Sources of Utilities and Environmental Impact
2067
A New Methodology to Apply Total Site Analysis as a Synthesis Tool to Select and Integrate Processes in MultipleProduct Biorefinery Plants
2073
Discovering Valorisation Paths in Waste Biorefineries using an Ontology Engineering Approach
2079
Integration of Biomass Gasification and CO2 Capture in the LCA Model for the Energy Water and Food Nexus
2085
Sensor Fault Detection and Fault Tolerant Control of a Crude Distillation Unit
2091
Utilising Semantics for Improved Decision Making in Biorefinery Value Chains
2097
MINLP Wastewater Stabilisation Ponds Synthesis using Rigorous Models under Different Scenarios
2103
Process simulation integrated with experimental Thermodynamics Lab to Chem Eng undergraduate students
2109
Evaluation of a calcium looping CO2 capture plant retrofit to a coalfired power plant
2115
Constrained Smoothing of Experimental Data in the Identification of Kinetic Models
2121
Optimal Design of Industrial WastetoEnergy Networks
2127
Modelling of Starch Production by Microalgal Biomass under Multinutrient Limitation
2133
Water and Energy Why Not Optimize Them simultaneously?
2139
Experimental Studies and Model Based Optimisation of Microalgal Production of Fuels and Chemicals
2145
Model analysis and optimization under uncertainty using highly efficient integration techniques
2151
Unit Commitment Scheduling Including Transmission Constraints a MILP Formulation
2157
Optimization of a crude oil distillation unit based on totalprocess simulation
2163
Capacity Planning with Rational Markets and Demand Uncertainty
2169
Quality Education in Romanian Chemical Engineering Higher Education
2175
A Study on the Endogenous Symbiosis of First and Second Generation Biorefineries Towards a Systematic Methodology
2181
Process evaluation of the ecological performance of food and energy plant production systems
2187
An MILP Model for the Optimization of Hybrid Renewable Energy System
2193
TAEE Sustainable Process Design and Simulation
2199
A Cooperative Distributed Model Predictive Control for Nonlinear Systems with Automatic Partitioning
2205
Modelling simulation and experimental validation for styrene miniemulsion polymerization process
2211
Dynamic Metabolic Modelling of Cupriavidus necator DSM 545 in PHB Production from Glycerol
2217
Waste heat utilisation of Croatian cement industry accounting Total Site demands
2223
Cogasification of torrefied wood biomass and sewage sludge
2229
Total Site Resource Efficiency System
2235
Empirical Modelling to support Scale up of Primary Pharmaceutical Processes
2241
A Methodology for Linear Modeling Applied to Process Synthesis of Ethanol from Sugarcane Bagasse
2247
Macro and Microeconomic Perspectives regarding the Syntheses of Sustainable BioFuels Supply Networks
2253
Innovative 3D Training Platform for Recycling of Waste coming from Electric and Electronic Devices
2259
Process Integration of Heat Utilised from Exhaust Gases
2265
Hydrocracking Reaction Model of Petroleum Heavy Cuts Using Molecular Reconstruction
2271
Data Reconciliation for Energy System Flowsheets
2277
PowertoHeat Opportunities in Reserve Market Participation for Flexible Chemical Production
2283
Optimisation of heat exchanger networks involving isothermal and nonisothermal mixing by global and local solvers
2289
Integrated Hybrid Life Cycle Optimization with Application to Sustainable Design of A UK Advanced Biofuel Supply Chain
2295
Optimal Design and Synthesis of Algae Processing Network under Uncertainty Based on Return on Investment
2301
Systematic Design of the Green Ethylene Glycol Downstream Process under the Generalized Disjunctive Programming Framework
2307
A pharmacokineticpharmacodynamic model for individualisation of an oral anticoagulation therapy
2313
Multiobjective optimization of energy networks under demand uncertainty
2319
A Convex Hull Formulation for the Design of Optimal Mixtures
2325
An Ontological Approach to Chemical Engineering Curriculum Development
2331
Dynamic Realtime Optimization Under Uncertainty of a Hydroformylation Miniplant
2337
Integrated Computeraided Framework for Sustainable Chemical Product Design and Evaluation
2343
Production of Benzene Toluene and the Xylenes from Natural Gas via Methanol
2349
Mathematical Modeling of a Raceway Pond System for Biofuels Production
2355
Configurable Scheduling Solution using Flexible Heuristics
2361
Towards OutcomesBased Education of ComputerAided Chemical Engineering
2367
Nonlinear Model Order Reduction for Catalytic Tubular Reactors
2373
Multiobjective Optimisation Approach for the Synthesis of Water Treatment Plants
2379
PGraph Approach to CarbonConstrained Energy Planning Problems
2385
Innovative computational tools and models for the design optimization and control of carbon capture processes
2391
Decision Making Across Different Scales From Process Control to Supply Chain Management
2397
ESCAPEing into a sustainable future Can we optimise our way to sustainable development?
2403
Models and Modelling Tools for Chemical Product and Process Design
2404
Process Integration Pinch Analysis and Mathematical Programming Directions for Future Development
2405
Management of Systematic Innovation A kind of quest for the Holy Grail
2407
Challenges and Opportunities in Sustainable Supply Chains
2409
The ALAMO approach to machine learning
2410
Author Index
2411

Otras ediciones - Ver todo

Términos y frases comunes

Sobre el autor (2016)

Professor Zdravko Kravanja is a professor at the University of Maribor, Slovenia

Información bibliográfica